BPVFS - TORRSEAL PART A PN/953-0001
- MSDS: BPVFS
- Manufacturer: VARIAN ASSOCIATES
- Product Name: TORRSEAL PART A PN/953-0001
- National Stock Number: 8030-00-998-3321
Product Identification
Product ID:TORRSEAL PART A PN/953-0001
MSDS Date:05/20/1986
FSC:8030
NIIN:00-998-3321
Kit Part:Y
MSDS Number: BPVFS
Responsible Party
PALO ALTO, CA 94303
US
Emergency Phone: 415-493-4000
Info Phone: 415-493-4000
Cage: 06980
Contractor
Telephone: 415-592-1221
Cage: 06980
Ingredients
MAGNESIUM SILICATE HYDRATE
CAS: 1343-90-4
RTECS: OM4360000
Fraction By Weight: 46%
ACGIH TLV: 2 MG/M3
BIS PHENOL A-EPICHLOROHYDRIN EPOXY RESIN
Fraction By Weight: 50%
TITANIUM DIOXIDE
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 2 - 10%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
Hazards
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Health Hazards Acute and Chronic:MAY BE MILDLY IRRITATING TO SKIN.
Effects of Overexposure:CONTACT WITH SKIN OR EYES MAY CAUSE IRRITATION.
Medical Cond Aggravated by Exposure:NONE KNOWN
First Aid
First Aid:IN CASE OF SKIN CONTACT WASH WITH SOAP AND WATER ATO FIRST
OPPORTUNITY. IN CASE OF EYE CONTACT FLUSH WITH COPIOUS AMOUNTS OF
WATER FOR 15 MINUTES.
Fire Fighting
Flash Point Method:COC
Flash Point:470F,243C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:SCRAPE UP, TRANSFER TO METAL CONTAINER.
SOLVENTS MAY BE NECESSARY TO CLEAN UP STICKY RESIDUE, BUT OBSERVE
HEALTH AND FIRE HAZARDS OF SOLVENT.
Handling
Handling and Storage Precautions:STORE AWAY FROM DIRECT HEAT, WHICH
MIGHT CAUSE PHYSICAL SEPARATION OF FILLER.
Exposure Controls
Respiratory Protection:NONE REQUIRED
Ventilation:LOCAL EXHAUST: ONLY IF HEATED
Protective Gloves:RUBBER/PLASTIC
Eye Protection:GOGGLES
Other Protective Equipment:NONE REQUIRED
Supplemental Safety and Health
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:0
Vapor Pres:NIL
Spec Gravity:1.6
Evaporation Rate & Reference:>1
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE HIGH VISCOSITY LIQUID, VERY SLIGHT ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:CARBON MONOXIDE, ALDEHYDES
Conditions to Avoid Polymerization:DO NOT MIX LARGE AMOUNTS OF EPOXY
RESIN WITH DIETHYLENETRIAMINE W/O RECOGNITION OF DEVELOPMENT OF
EXOTHERMIC HEAT.
Disposal
Waste Disposal Methods:THIS IS NOT A HAZARDOUS MATERIAL UNDER THE
RESOURCE CONSERVATION AND RECOVERY ACT.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.